Using Instruction |
|---|
| This cylinder is used only as a lifting device. This cylinder is designed for longitudinal loads. It should not be used in a horizontal position. The cylinder should not be used as any supporting structural device. The operating temperature range of the hydraulic oil should be selected between -40°C and +80°C. |
| General Information |
|---|
| The cylinders are produced in standard RAL 9005 coded black paint and the minimum thickness has been subjected to ISO 9227 natural salt spray test for 480 hours. All stages are 20 µm hard chromed. The trunnions are made of cast steel or forged steel. Cylinder heads are made of forged steel. All stages are manufactured from seamless cold drawn S355J0 quality material. |
| Safety Rules |
|---|
| Do not operate above the permissible working pressure and load capacity. Adjust the safety valve only to the permissible working pressure. Pay attention to the characteristics of the hydraulic oil used in the cylinder and use a filter. Do not load over capacity and unbalanced load on the vehicle. |
| Specification | Value |
|---|---|
| Cylinder Type | FRONT-END |
| Type Description | With Cross Trunnion Mount |
| Actuation | Single Acting |
| Effective Diameter | 185 |
| Number of Stages | 6 |
| Total Stroke | 6120 |
| Closed Length | 187 |
| Oil Volume (Lt.) | 95 |
| Max. Working Pressure (Bar.) | 190 |
| Max. Tipping Weight (Ton.) | 51 |
| Weight (Kg.) | 301 |
| ØA (mm.) | 218 |
| ØB (mm.) | GE 50 |
| ØC (mm.) | 60 |
| D (mm.) | 260 |
| E (mm.) | 58 |
| I (mm.) | 122 |
| J (mm.) | 40 |
| K (mm.) | 187 |
| L (mm.) | 1422 |
| R (mm.) | 55 |
| T (Oil Inlet) (BSP) | 3/4" |
